Skip to content
  • T: (250) 561-1181
  • jim@linfab.com
  • Home
  • About Us
  • Equipment
    • Step Feeders
    • Log Ladders
    • Quadrant Log Feeders
  • Parts
  • Contact Us
Menu
  • Home
  • About Us
  • Equipment
    • Step Feeders
    • Log Ladders
    • Quadrant Log Feeders
  • Parts
  • Contact Us
Request a Quote

Parts Category: SAW SYSTEM - CARRIAGE DRIVE COMPONENTS

Browning Spur Gear 24TH x 3″ Face, 14 1/2 Degree

Spur Gear Track Assembly by Linden (8′ Section)

ZDNM2334T Modified Baldor 20 HP TENV, 284TC Premium Efficiency Vector Motor c/w Stegmann Absolute Position Encoder (Custom Shaft)

Flender Reducer-N KAFS128 12.56:1 c/w C-Face Adapter for 284TC Nema Frame

Carriage Drive Mount Assembly c/w 90 mm Bearing

Reducer Internal Solid Shaft c/w Spur Gear

McGill Sphere-Roll Bearing c/w Lambda Seals for 90mm Shaft

Smalley WH-625 Retaining Ring

© Linden Fabricating Ltd.
Website Built and Maintained by Shift Creative Solutions

Instructions

Quadrant Log Feeders
Log Ladders
Self-Cleaning and Double Acting Step Feeders
Single Acting Step Feeders
Quadrant Log Feeders

The serial number will be located on the high fence (either left or right) as indicated in the picture. It will be a yellow plate, with the serial number stamped into it. In a case where there are no high fences, it will be on either end, of the low/ no fence.

Log Ladders

The serial number will be located on the fence, on the drive side (hydraulic or electric) as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.

Self-Cleaning and Double Acting Step Feeders

The serial number will be located inside the web of the vertical frame member nearest the drive unit as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.

Single Acting Step Feeders

The serial number will be located on right hand side (RHS with flow), fixed step plate as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.