Skip to content
  • T: (250) 561-1181
  • jim@linfab.com
  • Home
  • About Us
  • Equipment
    • Step Feeders
    • Log Ladders
    • Quadrant Log Feeders
  • Parts
  • Contact Us
Menu
  • Home
  • About Us
  • Equipment
    • Step Feeders
    • Log Ladders
    • Quadrant Log Feeders
  • Parts
  • Contact Us
Request a Quote

Parts Category: Quadrant Log Feeder

DAQLF Inner Drive Plate QT100-4″

DAQLF Drive Hub 90mm Pin Only (9″L x 5.5″ Dia)

DAQLF Outer Drive Plate QT100-4″ with 90mm Pin

Bell Crank Assembly QT100-4″ w/ 5-7/16 4140 Shaft

3-15/16″ Pillow Block Bearing (QMP20J-315SM “Blue Brute”)

SNL Top Bushing

SNL Bottom Bushing

SNL Pipe Bushing Bottom Mount

DAQLF Outer Driver Linkage c/w 90 mm McGill Bearings

DAQLF Inner Driver Linkage c/w 90 mm McGill Bearing (Anson EXTRA)

← older
© Linden Fabricating Ltd.
Website Built and Maintained by Shift Creative Solutions

Instructions

Quadrant Log Feeders
Log Ladders
Self-Cleaning and Double Acting Step Feeders
Single Acting Step Feeders
Quadrant Log Feeders

The serial number will be located on the high fence (either left or right) as indicated in the picture. It will be a yellow plate, with the serial number stamped into it. In a case where there are no high fences, it will be on either end, of the low/ no fence.

Log Ladders

The serial number will be located on the fence, on the drive side (hydraulic or electric) as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.

Self-Cleaning and Double Acting Step Feeders

The serial number will be located inside the web of the vertical frame member nearest the drive unit as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.

Single Acting Step Feeders

The serial number will be located on right hand side (RHS with flow), fixed step plate as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.