Skip to content
  • T: (250) 561-1181
  • jim@linfab.com
  • Home
  • About Us
  • Equipment
    • Step Feeders
    • Log Ladders
    • Quadrant Log Feeders
  • Parts
  • Contact Us
Menu
  • Home
  • About Us
  • Equipment
    • Step Feeders
    • Log Ladders
    • Quadrant Log Feeders
  • Parts
  • Contact Us
Request a Quote

Parts Category: Log Ladder

LL Drive Arm Clevis Pin – 1.75″ (Electric Drive)

Drive Arm Clevis c/w LL1045J Jam Nut (Hood Wiggins)

Pin (Hood Wiggins)

Drive Pin 60mm x 7 9/16 Long x 4″ Press Fit

LL Drive Arm Clevis – 2 x 12 Thread (Electric Drive) – NO PIN

LL Drive Arm Clevis Pin – 1.75″ (Electric Drive) – NOTE: Obsolete

LL 10″ Pipe 6″ Wide Housing c/w Poly Bushing

LL Nut & Bolt Kit

Proximity Cam Shaft

LL Proximity Cam Assembly

← older
© Linden Fabricating Ltd.
Website Built and Maintained by Shift Creative Solutions

Instructions

Quadrant Log Feeders
Log Ladders
Self-Cleaning and Double Acting Step Feeders
Single Acting Step Feeders
Quadrant Log Feeders

The serial number will be located on the high fence (either left or right) as indicated in the picture. It will be a yellow plate, with the serial number stamped into it. In a case where there are no high fences, it will be on either end, of the low/ no fence.

Log Ladders

The serial number will be located on the fence, on the drive side (hydraulic or electric) as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.

Self-Cleaning and Double Acting Step Feeders

The serial number will be located inside the web of the vertical frame member nearest the drive unit as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.

Single Acting Step Feeders

The serial number will be located on right hand side (RHS with flow), fixed step plate as indicated in the picture. It will be a yellow plate, with the serial number stamped into it.